Chris has finished his grooves and is ready to crosscut his Front and Back
Accurate Layout is important.
A crosscut sled quickly gets squared up to do the first cut on the front AND BACK
Rolly takes his time to be accurate, cutting 1 1/2 inches away from his drawer opening.
he wants to split that layout line in two!
Almost there....better to creep up to a cut like this.
After the front and back are squared, a stop block is set up to crosscut both the same size
Be sure to mark which side of the board was squared.
Wathch Rolly Cross cut. Front and Back with a stop block.
Rodrigo and Kei Wing were tired of waiting for a table saw, so they tuned up the Miter saw.
No comments:
Post a Comment