 |
| The Dry Fit |
Daniel Makes sure all his machining was done correctly
Chris says his joints are almost perfect. "Almost"
Just a little trim on the shoulder of the top panel should do the trick
There, a slight tweek and it all comes together.
Strap clamps hold four corners together tightly and often do the trick
Be sure to position the corners onto the joint correctly to distribute the load properly
Kho will glue his box in stages because his top will be set in a rebate.
Rodrigo admires Nicole's systematic and well planned dry assembly.
Proper positioning of cauls and load distribution of clamps are all taken into consideration
 |
| Rebates may machine quicker than dadoes and grooves, but assembly may prove more challenging. |
All glued up....Congratulations!
Time for a Lemonade
 |
| What a square :) |
No comments:
Post a Comment